Planet Eclipse ETEK5

ETEK5

Welcome to the 5th dimension!

The Etek5 is only available as "LT version". Again, components made of fiberglass-reinforced nylon are used, such as the clamp feed, the eye covers and the grip frame. Additionally an OLED display can be mounted.

The ETEK series has stood for reliability and ease of maintenance for many years. The 5th generation of the ETEK seamlessly continues this philosophy and sets new standards in the middle price segment.

Inside the ETEK5 Pro the ZICK3 technology works precisely. Here the bolt (Cure5 Bolt) is moved over the chamber. This enables the system to achieve a high firing rate and at the same time is very gentle to the paint. The low working pressure of approx. 150PSI on the HPR and 85PSI on the LPR make the ETEK5 PRO as quiet and gentle as no other ETEK before.

The SL4 regulator in the front handle is low-maintenance, robust and easy to use. The SL4 regulator works efficiently in a pressure range from approx. 250 PSI (SLP) to approx. 600 PSI. (MP) A LP compressed air system with 450 PSI outlet pressure is recommended.

The SL4 regulator in the front handle is low-maintenance, robust and easy to use. The SL4 regulator works efficiently in a pressure range from approx. 250 PSI (SLP) to approx. 600 PSI. (MP) A LP compressed air system with 450 PSI outlet pressure is recommended.

The ETEK5 Pro comes with a powerful board which is quick and easy to operate. If this is not enough, you can enjoy the Planet Eclipse OLED display, which is included free of charge. Thanks to its plug and play function, the OLED display can be mounted in just a few steps. All important information about the ETEK5 Pro is shown on a digital display.

With the Planet Eclipse EMC Kit Gemini (included) you can modify the marker into a perfect scenario and woodland weapon. The built-in Picatinny rails on the EMC Kit Gemini give you the opportunity to add more tactical accessories.


Tecnical Data:
  • Weight: 1000g/2.2lb (inc Barrel, Battery, Feed Tube, OOPS)
  • Length: 552mm (inc Barrel)
  • Height: 215mm
  • Width: 31mm
  • Autococker threads
Construction materials:
  • Body – 6082-T6 Aluminium
  • Barrel – 6061-T6 Aluminium
  • Frame – Glass Reinforced Nylon (GRN)
  • Trigger - 6061-T6 Aluminium
  • Feed Neck - Glass Reinforced Nylon (GRN)
  • Eye Covers - Glass Reinforced Nylon (GRN)
Electronic:
  • Interface – Single Push Button and Trigger
  • Display – LED or Optional 32x128 Graphical OLED
  • Solenoid voltage – 9V
  • Processor voltage – 5V
  • Processor – PIC16F1829 XLP (Extreme Low Power) Microcontroller
  • Power Supply – 9v Alkaline Battery (IEC 6LR61 / ANSI 1604A)
  • E-Portal - Not Compatible
Hardware:
  • ASA Mount – Bolted to Frame
  • Trigger Methods – Micro Switch
  • Trigger Mechanism – Magnetic return
  • Trigger Pivot – Sintered Brass Bushes
  • Barrel – 2-piece Micro honed 14.5" (Shaft4 compatible - Bore size may vary)
  • Feed Tube – Lever operated Clamping Feed
Pneumatics:
  • Operating Principle – Stacked tube poppet
  • Solenoid Type – SMC with custom direct mount manifold
  • Drive Mechanism – Zick3 Rammer Kit
  • Bolt Mechanism – Cure5 bolt with GSL soft tip
Ergonomics:
  • Grip Type – Contoured dual density grips and dual density unibody foregrip
  • Grip Pitch – 175mm
Firmware:
  • Firing Modes – Semi capped & uncapped. Ramping up to 15BPS
  • Debounce Modes – 10 Debounce Presets
Scope of delivery:
  • Solid Aluminum-Case with Zipper
  • Planet Eclipse Etek5 LT
  • Shaft4 Back .689
  • Shaft Front 14,5"
  • Cure5 Bolt
  • Planet Eclipse Allen Key Set
  • Planet Eclipse Oil, 10ml
  • Planet Eclipse Barrel Sock
  • Etek5 Spare Parts Kit
  • ETEK5 Manual
  • Manual


ETEK5 Barrelkits

» show all

ETEK5 Maintenance and spare parts

» show all
  Up